Geo Phone T19i flash file cm2 read








Card found : 33D52D2E , v0150
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.13

Load IDBase v8331 Ok!


Operation : Read FW [ v2.13 ]
Extra : Ignore CriticalPart Verify : Enabled

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
>>>   ERROR : Protocol HandShake failed!

>>>  Error : Fail to init protocol!
>>>  Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Read FW [ v2.13 ]
Extra : Ignore CriticalPart Verify : Enabled

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 


>>>  Device not found!
>>>  Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Read FW [ v2.13 ]
Extra : Ignore CriticalPart Verify : Enabled

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9820E_BASE : SC9820e_eMMC_512MB_RS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0002
FDL : Control transfered!

Boot Done!


>>>  Error : Device NOT INITIALIZED ! Initialize it first via "IDENTIFY" !
>>>  Make sure you have made "IDENTIFY" first!

Reconnect Power/Cable!

Operation : Identify [ v2.13 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9820E_BASE : SC9820e_eMMC_512MB_SS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0002
FDL : Control transfered!

Boot Done!

Device info : 
Patch Level    : MRA58K
Display ID     : MRA58K release-keys
Ver. Incmt     : A356_02X_CF13_T19i_Geo_Phone_V08_20210511
Ver. CodeName  : REL
Ver. Release   : 6.0
Sec. Patch     : 2016-07-01
Build Time     : 11.05.2021
Product Model  : T19i
Product Brand  : SPRD
Product Name   : T19i
Product Device : sp9820e_1h20
Product Board  : sp9820e_1h10
Product Manfct : SPRD
Board Platform : sp9820e
Product Info   : sp9820e_1h20


UserData : STATE : PLAIN [EXTFS]

 - > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:00:41

Operation : Read FW [ v2.13 ]
Extra : Ignore CriticalPart Verify : Enabled

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9820E_BASE : SC9820e_eMMC_512MB_SS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0002
FDL : Control transfered!

Boot Done!

Device info : 
Patch Level    : MRA58K
Display ID     : MRA58K release-keys
Ver. Incmt     : A356_02X_CF13_T19i_Geo_Phone_V08_20210511
Ver. CodeName  : REL
Ver. Release   : 6.0
Sec. Patch     : 2016-07-01
Build Time     : 11.05.2021
Product Model  : T19i
Product Brand  : SPRD
Product Name   : T19i
Product Device : sp9820e_1h20
Product Board  : sp9820e_1h10
Product Manfct : SPRD
Board Platform : sp9820e
Product Info   : sp9820e_1h20

AndroidVer : 6
VlnrLevel : 0x00

SP9820E__SPRD__T19i__6.0__MRA58K__sp9820e_1h20

Read : prodnv.img
ExtSparse : Compression ratio : 14%
Read : phase.cfg
Read : recovery.img
Read : tos.bin
Read : sml.bin
Read : u-boot.bin
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : nvitem_l.bin
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : modem_wcn.img
Make : persist.img
Read : modem_l.bin
Read : deltanv_l.bin
Read : gdsp_l.bin
Read : ldsp_l.bin
Read : pm_sys.bin
Read : boot.img
Read : system.img
ExtSparse : Compression ratio : 77%
Make : cache.img
Make : udisk.img
Make : userdata.img
Read : u-boot-spl.bin

Firmware size : 0x1ED8B904 ( 493.55 MiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!

Done!
Elapsed: 00:03:33












brand & model name: Geo phone
file name: sc9820e pac
support device: Geo T19i
frimware extension: rar
uploaded on:Google drive
file status: pac file
how to flash: Down

                               
  how to flash

1.download and extract the Geo T
19i stock frimware package on the computer

2.after extracting the package you will be able to get the frimware file,flash tool,driver
and how to flash guide

3.install the provided usb driver on the computer (if the usb driver is already installed
then skip this step)
4.follow the how to flash manual to flash or install the frimware on your Geo T19i device
















phone’s lights are late.
Automatically restart your phone.
Automatically install the application on your phone.
unfortunately app has been stopped android.
System App Missing Or Error.
After Flash LCD Blinking Blue Display.
Ram Cache Working Very Slowly.
Phone Working Very Slow And Stuck.
After Flash Dead Recovery Fix.
Display problem Like Blue/Black or white Fix.
Following Hand reset Come Frp Or even Gmail Lock.
After Flash Hang On Logo Solved.
Suddenly Auto Reboot  Fix.
Tools Da Not Match Or Secure Boot Error Problem.
Alas App Happens to be Stopped.
Unwanted Monkey Virous, Spam, Automatically Data Or Wifi On Off.